This is default featured slide 1 title
This is default featured slide 2 title
 

A Brief Explanation of How Do Fire Alarms Work

Fire alarms are small devices that are triggered off when they sense smoke that enters a special chamber inside them. Read this article to know more about this topic.
True, these home security systems (home alarm systems) keep us safe from external intrusion. But what about the threats that lurk inside our houses all the time as we go about doing our daily chores? One such threat is fire.

What is a Fire Alarm?

A fire may break out in one room and then spread stealthily to other rooms without any noise or warning. By the time we realize, the raging flames may have engulfed the whole house. However, the device that amazingly gives us a warning signal against the break out of a fire is the small alarm that lies inconspicuously attached to the ceiling of a room.

Working

There are mainly two types of smoke alarms (fire alarms) depending upon the type of detector that is used in them. The smoke detectors used are the ionization and the photoelectric detectors. Most fire alarms use either one or both the types.

Ionization Detectors

They have a small quantity of Americanum-241 that serves as the source of ionizing radiation. The alpha particles that are constantly released by Americanum-241 strike with the oxygen and nitrogen atoms in the air. This knocks off electrons from the oxygen and nitrogen atoms resulting in the formation of positively charged ions. Ionization detectors also have an ionization chamber, which houses two plates about a centimeter apart.

Photoelectric Detectors
In these devices, the alarm is set off once the straight path of light beam inside the photoelectric chamber gets disrupted by smoke particles. Photoelectric detectors have a T-shaped chamber that contains an incandescent bulb or an infrared LED, which acts as a light source. There is a lens in these systems that collimates the light being emitted from the light source into a beam. There is a photodiode or some other photoelectric sensor at the base of the vertical arm of the T-shaped photoelectric chamber, which acts as a light sensor. In the absence of smoke, the beam of light travels in a straight path without coming in contact with the light sensor.

Informative Points

Over 85% of the houses in the United States have fire alarm systems installed in them. Given this fact, the number of fire related casualties should have been way below the recorded statistics. Does this mean that most of the accidents caused due to fire take place in the remaining 15% of the houses that do not have fire alarms? This interpretation doesn’t sound feasible. The fact is that just installing a fire alarm does not guarantee safety from fire breaking out in the house. Once installed, these devices need to be regularly checked if they are in working condition to ensure fire safety.